Bendi Forklift

Compare Forklift Prices and save up to 30%!

Compare Forklift Prices and save up to 30%!

Bendi Forklift

How Much Does a Bendi Forklift Cost?

Bendi Forklift – Bendi Company is popular for articulated forklift trucks offering various Bendi narrow aisle forklifts (VNA) that will surely suit anyone’s budget, layout, or site. Its forklifts work almost everywhere, from the most demanding multi-shift operations to the highest racking bays and the narrowest aisles. Do you need to save storage space for whatever purposes? Bendi could offer you a more cost-effective way of handling pallets -be it pallet racks or pallet jacks.

Bendi Forklift

Compare Forklift Prices and save up to 30%!

Compare Forklift Prices and save up to 30%!

In the US, Bendi Forklift is mainly distributed by Kansas-based Landoll, a forerunner in marketing innovative products for OEM, material handling, transportation, and agriculture.

Specializing in narrow and very narrow axle forklifts

The company’s products are available in gas, diesel, and electric-powered models. With its unique combination of maneuverability and power, Bendi trucks help customers work smarter by increasing productivity and reducing costs.

Fits under 8-foot tunnel heights

The company has a wide range of products that can meet different customer needs. If you are looking for something special or have unique requirements, chances are Bendi already has a solution for you.

Here are the various types of Bendi Forklifts

Bendi Forklift B3/30AC

Bendi Model B3/30AC

This three-wheel articulating Bendi Forklift with 3,000 lbs basic capacity at 600mm load center works even in aisles as narrow as 1.8 meters. Its lift heights reach 9.14m. The best part of it is that it can work inside and outside, provided surfaces are paved.

The Bendi B3/30AC performs everything that a reach truck can do in aisles at least 1M smaller. It comes with a single poly front drive tire and solid rubber rear tires. Other important specifications are as follows:

  • 220° Front articulation of 220°
  • Compact front end and narrow mast enable seamless stacking in very narrow aisles.
  • Forklift Dimensions: Length 2,438mm x Width 1,096mm x Height (mast lowered) 2,067mm
  • Operator compartment: Length 620mm x Width 920mm
  • Battery compartment: Length 700mm x Width 610mm

Bendi Forklift B40VAC

Bendi B40VAC

This four-wheel articulating Bendi Forklift is well-known for its ability to climb steep ramps and its fast travel speeds. It comes with soft-poly front load tires with two rear-drive tires that are independently driven. It performs well in aisles as narrow as 1.8M.

The machine’s hydrostatic transmission provides operators with precise speed control. Its high-speed performance ensures that the operator can complete tasks quickly and efficiently.

This high-performance VNA model has lift heights reaching to 9.14M and 4,000 lb. basic capacity at 600mm load center. Its load center is located behind the rear tires.

The Bendi model B40VAC works in aisles as narrow as *72″ (1.8M), has a basic capacity of 4,000 lbs. (1814 kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). This high-performance VNA Model has fast travel speeds and can climb steep ramps.

Here are its other specifications:

  • 220° Front articulation of 220°:
  • Forklift dimensions: Length 3,035mm x Width 1,096mm x Height (mast lowered) 2,067mm
  • Operator compartment: Length 838mm x Width 920mm
  • Battery compartment: Length 700mm x Width 610mm

Other strong points

  • work inside and outside on paved surfaces
  • ride smoothly over uneven floors, thanks to its floating front axle
  • great for loading or unloading containers and trailers, thanks to its three masts

Bendi Forklift Rentals

Bendi B30AC/B40AC

This four-wheel articulating Bendi Forklift is similar to Bendi B40VAC, except that it has a four-stage mast option that makes it perform better in loading and unloading containers and trailers. It has 3,000 lb basic capacity at 600mm load center and lift heights extending to 7.92m. It works well in aisles as narrow as 1.98m.

The machine comes with a four-wheel hydrostatic drive that gives the operator precise speed control. Its AC power unit delivers high torque at low speeds, making it ideal for lifting heavy loads.

Other important specifications are as follows:

  • 220° Front articulation of 220°
  • Forklift Dimensions: Length 3,048mm x Width 1,096mm x Height (mast lowered) 2,067mm
  • Operator compartment: Length 838mm x Width 920mm
  • Battery compartment: Length 700mm x Width 610mm
  • Ideal for loading or unloading containers and trailers
  • Has large diameter tires with excellent under clearance that avoids floor obstructions.
  • Has exceptional control attributed to Landoll DuraSteerTM front wheel hydraulic steering
  • 48 Volt Electrical System
  • Interactive LCD Status Monitor
  • Its Creep Speed Mode boosts control, especially during load handling at high elevations or operator training
  • Rear wheels are controlled independently

Bendi B40AC-HL/B50AC-HL

This four-wheel articulating Bendi Forklift boasts of a new three-stage mast design with a rigid mounting that offers improved visibility and capacity. It also comes with a tilting and side shifting carriage as a standard.

The machine is ideal for working in very narrow aisles. Its overall width is only 1,096mm, but it can reach to 3,810mm with its extension mast.

This unique model with a basic 4,400 lb capacity is great in maneuvering in aisles as narrow as 1.98m at 600mm load center. Its lift heights reach 12.50m.

The machine comes with a four-wheel hydrostatic drive that gives the operator precise speed control. Its AC power unit delivers high torque at low speeds, making it ideal for lifting heavy loads.

Other important specifications are as follows:

  • 220° Front articulation of 220°
  • Forklift Dimensions: Length 2,438mm x Width 1,096mm x Height (mast lowered) 2,067mm
  • Operator compartment: Length 838mm x Width 920mm
  • Battery compartment: Length 700mm x Width 610mm
  • Articulated and rigid three-stage mast option
  • Tilting and side shifting carriage as standard
  • Exceptional control attributed to Landoll DuraSteerTM front wheel hydraulic steering
  • 48 Volt Electrical System
  • Interactive LCD Status Monitor
  • Its Creep Speed Mode boosts control especially during load handling at high elevations or operator training
  • Rear wheels are controlled independently
  • Has optimized chain routings and house as well as dual free lift cylinders.
  • Has improved aisle performance, thanks to reduced lowered heights and new mounting position on 1067mm-wide front axle.
  • Camera mountings were integrated into the inner mast
  • integral side shifting fork positioner combination (optional)

Bendi B40AC-DR B50AC-DR

This four-wheel articulating Bendi Forklift has quite the same features as the Bendi B40AC-HL/B50AC-HL, except that its new design features a mounting position on the 1,219mm-wide front axle.

The machine is ideal for working in very narrow aisles. Its overall width is only 1,096mm, but it can reach 3,810mm with its extension mast.

This unique model with a basic 4,400 lb capacity is great for maneuvering in aisles as narrow as 1.98m at a 600mm load center. Its lift heights reach 12.50m.

The machine comes with a four-wheel hydrostatic drive that gives the operator precise speed control. Its AC power unit delivers high torque at low speeds, making it ideal for lifting heavy loads.

This model has a 2,500 lb basic capacity at a 600mm load center. Its lift heights reach 10.80m while the distance from the face to the mast extends to 1,321mm. `It is capable of stacking loads two deep in aisles as narrow as 2.4m.

Other important specifications are as follows:

  • 220° Front articulation of 220°
  • Forklift Dimensions: Length 2,438mm x Width 1,096mm x Height (mast lowered) 2,067mm
  • Operator compartment: Length 838mm x Width 920mm
  • Battery compartment: Length 700mm x Width 610mm
  • Articulated and rigid three-stage mast option
  • Tilting and side shifting carriage as standard
  • Exceptional control attributed to Landoll DuraSteerTM front wheel hydraulic steering
  • 48 Volt Electrical System
  • Interactive LCD Status Monitor
  • Its Creep Speed Mode boosts control, especially during load handling at high elevations or operator training
  • Rear wheels are controlled independently
  • Has optimized chain routings and house as well as dual free lift cylinders.
  • Has improved aisle performance, thanks to reduced lowered heights and new mounting position on 1219mm-wide front axle.
  • Camera mountings were integrated into the inner mast
  • integral side shifting fork positioner combination (optional)
  • 838 mm-wide tilting and side shifting fork carriage
  • integral pantograph reach stroke is 1,041 mm.
  • Face to mast reach is 1,321mm
  • Three-stage mast
  • Front Wheel Steer (Hydraulic Power Steering)
  • Creep speed mode

Bendi B55AC Forklift

Bendi B55AC

This four-wheel multipurpose electric articulating forklift shares the same standard features of Bendi forklifts, except having a higher starting capacity at around 5,500 lbs at600mm load center. Its lift heights reach 9.14m.

The machine is ideal for working in very narrow aisles. Its overall width is only 1,096mm, but it can reach to 3,810mm with its extension mast.

This model has a 5,500 lb basic capacity at 600mm load center. Its lift heights reach to 9.14m while the distance from the face to the mast extends to 1,321mm. `It is capable of stacking loads two deep in aisles as narrow as 2.4m.

Other important specifications are as follows:

  • 220° Front articulation of 220°
  • Forklift dimensions: Length 2,438mm x Width 1,096mm x Height (mast lowered) 2,067mm
  • Operator compartment: Length 838mm x Width 920mm
  • Battery compartment: Length 700mm x Width 610mm
  • Articulated and rigid three-stage mast option
  • Tilting and side shifting carriage as standard
  • Exceptional control attributed to Landoll DuraSteerTM front wheel hydraulic steering
  • 48 Volt Electrical System
  • Interactive LCD Status Monitor
  • Its Creep Speed Mode boosts control especially during load handling at high elevations or operator training
  • Rear wheels are controlled independently
  • Has optimized chain routings and house as well as dual free lift cylinders.
  • Has improved aisle performance, thanks to reduced lowered heights and new mounting position on 1219mm-wide front axle.
  • Camera mountings were integrated into the inner mast
  • integral side shifting fork positioner combination (optional)
  • 838 mm-wide tilting and side shifting fork carriage
  • integral pantograph reach stroke is 1,041 mm.
  • Face to mast reach is 1,321mm
  • Three-stage mast
  • Front Wheel Steer (Hydraulic Power Steering)
  • Creep speed mode
  • Smooth rubber drive tires with large diameter
  • 1,219mm-wide articulated floating front axle
  • High load backrest, stroke side shifter at 914mm, and 288mm integral
  • Three- to four-stage mast allowing high visibility
  • Ergonomic Design
  • High Visibility Mast
  • DuraSteerTM Front Wheel Hydraulic Steering
  • Dual Rear Wheel Drive

Bendi Articulated Forklift Truck

Bendi B40i5

This four-wheel articulating Bendi forklifts is distinctive for its LPG Gas engine enabling it to run 24/7 without charging a battery. It performs well even in aisles as narrow as 1.98m.

This model has a 4,000 lb basic capacity at 600mm load center. Its lift heights reach 8.53m while the distance from the face to the mast extends to 1,321mm. `It is capable of stacking loads two deep in aisles as narrow as 2.4m.

Bendi B40i5 has 4,000 lb starting capacity at 600mm load center. Its lift heights can reach 9.14m.

Other important specifications are as follows:

  • 220° Front articulation of 220°
  • Forklift dimensions: Length 2,438mm x Width 1,096mm x Height (mast lowered) 2,067mm
  • Operator compartment: Length 838mm x Width 920mm
  • Battery compartment: Length 700mm x Width 610mm
  • Articulated and rigid three stage mast option
  • Tilting and side shifting carriage as standard
  • Exceptional control attributed to Landoll DuraSteerTM front wheel hydraulic steering
  • 48 Volt Electrical System
  • Interactive LCD Status Monitor
  • Its Creep Speed Mode boosts control, especially during load handling at high elevations or operator training
  • Rear wheels are controlled independently
  • Has optimized chain routings and house as well as dual free lift cylinders.
  • Has improved aisle performance, thanks to reduced lowered heights and new mounting position on 1219mm-wide front axle.
  • Camera mountings were integrated into the inner mast
  • integral side shifting fork positioner combination (optional)
  • 838 mm-wide tilting and side shifting fork carriage
  • integral pantograph reach stroke is 1,041 mm.
  • Face to mast reach is 1,321mm
  • Three-stage mast
  • Front Wheel Steer (Hydraulic Power Steering)
  • Creep speed mode
  • Smooth rubber drive tires with large diameter
  • 1,219mm-wide articulated floating front axle
  • High load backrest, stroke side shifter at 914mm, and 288mm integral
  • Three- to four-stage mast allowing high visibility
  • Ergonomic Design
  • High Visibility Mast
  • DuraSteerTM Front Wheel Hydraulic Steering
  • Dual Rear Wheel Drive`

Bendi Electric Forklifts

These electric models are powered by lithium-ion batteries.

Bendi Forklift

Bendi B30ACi

This three-wheel multipurpose electric articulating forklift shares the same standard features of Bendi forklifts, except having a lower starting capacity at 3,000 lbs at 600mm load center. Its lift heights reach 9.14m.

Other specs:

  • Smooth rubber drive tires with large diameter
  • 1,219mm-wide articulated floating front axle
  • High load backrest, stroke side shifter at 914mm, and 288mm integral
  • Three- to four-stage mast allowing high visibility
  • Ergonomic Design
  • High Visibility Mast
  • DuraSteerTM Front Wheel Hydraulic Steering
  • Dual Rear Wheel Drive

Bendi Forklift Rentals

Bendi offers forklift rentals for short-term and long-term requirements. Lease rates start at $259 a week.

For rates and availability, please contact your local Bendi dealer.

The Bendi Forklift is a versatile and powerful tool that can be used in a variety of applications. With its four wheels and articulated design, the Bendi Forklift is perfect for maneuvering in tight spaces. Its high lift capacity and reach make it ideal for loading and unloading trucks, as well as for stacking pallets. The Bendi Forklift is also available with a wide range of attachments, such as a side shifter, that can be used to perform a variety of tasks.

Whether you need a forklift for a one-time job or ongoing use, Bendi has a model that will meet your needs. And, with its rental program, you can try out a Bendi Forklift before you buy. So, contact your local Bendi dealer today and ask about renting a Bendi Forklift.

Bendi-Electric-Forklift

Bendi Narrow Aisle Forklift

The Bendi Narrow Aisle Forklift is a specialized forklift that is designed for use in narrow aisle storage without stagging. With its compact design and four wheels, the Bendi Narrow Aisle Forklift can maneuver in tight spaces with ease. And, with its high lift capacity and reach, the Bendi Narrow Aisle Forklift is perfect for loading and unloading trucks, as well as for stacking pallets.

If you need a forklift for use in a narrow aisle application, the Bendi Narrow Aisle Forklift is the perfect solution. So, contact your local Bendi dealer today and ask about renting or purchasing a Bendi Narrow Aisle Forklift at a very affordable cost.

The Bendi forklift is a versatile machine that can be used in a variety of settings. In addition to working in narrow aisles, the Bendi can also be used in bulk storage and congested manufacturing areas. It is also well-suited for use in push-back and drive-in rack systems. And because it is compact and maneuverable, the Bendi can also be used to load and unload rail cars and trucks. For businesses that operate outdoors, the Bendi is an ideal choice because it can withstand harsh weather conditions. No matter what the application, the Bendi forklift is up to the task.

Bendi Articulated Forklift Truck

The Bendi Articulated Forklift Truck is a versatile and powerful tool that can be used in a variety of applications. With its four wheels and articulated design, the Bendi Articulated Forklift Truck is perfect for maneuvering in tight spaces. Its high lift capacity and reach make it ideal for loading and unloading trucks, as well as for stacking pallets.

The Bendi Articulated Forklift Truck is also available with a wide range of attachments, such as a side shifter, that can be used to perform a variety of tasks.

Bendi forklifts in general, and the Bendi Articulated Forklift Truck in particular, are an excellent choice for businesses that operate in narrow aisles or congested areas. And, with its rental program, you can try out a Bendi Articulated Forklift Truck before you buy. So, contact your local Bendi dealer today and ask about renting a Bendi Articulated Forklift Truck.

Forklift Types

Forklifts come in a variety of types and sizes to fit your requirement.

Sit Down Rider

sit-down-rider

Sit down forklift has a seat for a rider which faces the mast. In this position operator can see the lifting process while comfortably seated, which increases productivity.

Pallet Jack

pallet-jack

Pallet jacks make pulling product through the warehouse or distribution center easy and convenient. Pallet jacks are cheap, small in size, and good for small loads.

Reach Truck

reach-truck

Reach Trucks deliver on efficiency, safety and performance. Unique features coupled with the longstanding productivity, ergonomics and low cost of ownership.

Order Picker

order-picker

An Order Picker solves even the most challenging high-reaching warehouse needs. They easily maneuver narrow aisles in warehouses with minimized rack impact during case picking.

Rough Terrain

rough-terrain

Rough Terrain forklifts are designed to be driven over uneven and rocky surfaces transporting a heavy load. Due to size, tires, and weight capacity, these forklifts are primarily used outdoors.

Lull Forklift

lull-forklift

The Lull forklift features a unique sliding chassis frame that allows workers to reach forward and retract, with an additional seven feet, without having to move the equipment.

Aerial Lifts

aerial-lifts

Aerial platforms and scissor lifts are for lifting workers (usually one or two people) and are excellent for indoor and outdoor construction, maintenance and installation applications.

Bucket Trucks

bucket trucks

Articulated telescopic bucket trucks are designed to be the safest and most reliable aerial lifts for the telecom, utility, electric power distribution & transmission and sign & light industries.

Share this post

Share on facebook
Share on twitter
Share on pinterest
Share on reddit
Share on linkedin
Share on email

Join thousands of people

Get FREE quotes from several equipment suppliers and compare them! 

No obligation. Then you decide.

Find a supplier you can trust.

Related Articles

forklift rental

The Pros and Cons of Forklift Rental

One of the necessities of all large warehouses is the forklift truck. Forklift trucks are powerful industrial machines that can lift and transport heavy materials through short distances. All warehouses, especially ones that house large and heavy materials such as lumber, construction materials, bulk products, machinery, and other goods, need at least one of these industrial machines to move those materials around.

Read More »
preowned used forklift

Get a Dependable Used Forklift

Though owning a forklift may sound great, the process of selecting and buying a used forklift is not as easy as it seems. Choosing a used forklift is quite a tedious job because there are so many options to choose from

Read More »
New Forklifts

Buying New Forklifts – A Guide

When buying new forklifts, there are questions to consider first even before you start looking at forklifts. These pointers will assist you in identifying your specific requirements and the type of forklift you may need.

Read More »